EP4CE30F23C8N Descrizione generale
The EP4CE30F23C8N is a field-programmable gate array (FPGA) manufactured by Intel (formerly Altera). It belongs to the Cyclone IV E series and features 30,000 logic elements (LEs), which are basic building blocks for implementing digital circuits. The "F23" designation indicates its speed grade, with performance characteristics specified by Intel. The "C8" suggests it comes in a ceramic package, while the "N" signifies a RoHS-compliant package.This FPGA supports various configurable features like digital signal processing (DSP) blocks, memory blocks, and embedded processors, making it suitable for a wide range of applications including telecommunications, industrial automation, and automotive systems. With its embedded hard intellectual property (IP) cores, developers can integrate functions such as memory controllers and PCIe interfaces, reducing design complexity and time to market. Its versatility, low power consumption, and cost-effectiveness make it a popular choice for designers seeking flexibility in their electronic systems
Caratteristiche principali
The Cyclone IV device family offers the following features:
Low-cost, low-power FPGA fabric:
6K to 150K logic elements
Up to 6.3 Mb of embedded memory
Up to 360 1818 multipliers for DSP processing intensive applications
Protocol bridging applications for under 1.5 W total power
Cyclone IV GX devices offer up to eight high-speed transceivers that provide:
Data rates up to 3.125 Gbps
8B/10B encoder/decoder
8-bit or 10-bit physical media attachment (PMA) to physical coding sublayer (PCS) interface
Byte serializer/deserializer (SERDES)
Word aligner
Rate matching FIFO
TX bit slipper for Common Public Radio Interface (CPRI)
Electrical idle
Dynamic channel reconfiguration allowing you to change data rates andprotocols on-the-fly
Static equalization and pre-emphasis for superior signal integrity
150 mW per channel power consumption
Flexible clocking structure to support multiple protocols in a single transceiver block
Cyclone IV GX devices offer dedicated hard IP for PCI Express (PIPE) (PCIe) Gen 1:
1, 2, and 4 lane configurations
End-point and root-port configurations
Up to 256-byte payload
One virtual channel
2 KB retry buffer
4 KB receiver (Rx) buffer
Cyclone IV GX devices offer a wide range of protocol support:
PCIe (PIPE) Gen 1 1, 2, and 4 (2.5 Gbps)
Gigabit Ethernet (1.25 Gbps)
CPRI (up to 3.072 Gbps)
XAUI (3.125 Gbps)
Triple rate serial digital interface (SDI) (up to 2.97 Gbps)
Serial RapidIO (3.125 Gbps)
Basic mode (up to 3.125 Gbps)
V-by-One (up to 3.0 Gbps)
DisplayPort (2.7 Gbps)
Serial Advanced Technology Attachment (SATA) (up to 3.0 Gbps)
OBSAI (up to 3.072 Gbps)
Up to 532 user I/Os
LVDS interfaces up to 840 Mbps transmitter (Tx), 875 Mbps Rx
Support for DDR2 SDRAM interfaces up to 200 MHz
Support for QDRII SRAM and DDR SDRAM up to 167 MHz
Up to eight phase-locked loops (PLLs) per device
Offered in commercial and industrial temperature grades
Pagamento
Spedizione e imballaggio
Garanzia
