Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

EP2C70F672C7N +BOM

Customizable integrated circuit

Produttore:

Intel
ProduttorePart #:

EP2C70F672C7N
Scheda dati:

EP2C70F672C7N Scheda dati (PDF)
Programmabe:

Not Verified
Number Of LABs/CLBs:

4276
Number Of Logic Elements/Cells:

68416
Total RAM Bits:

1152000
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per EP2C70F672C7N

EP2C70F672C7N Descrizione generale

With its impressive 70,000 logic elements, the EP2C70F672C7N FPGA from Intel's Cyclone II family sets the stage for innovation in industries such as telecommunications, automotive, and industrial automation. Boasting 672 pins, this FPGA guarantees seamless connectivity and compatibility with a variety of components, facilitating efficient data transfer and communication. Operating at a moderate speed grade denoted by "C7," this device ensures reliable performance in diverse applications. Supporting multiple I/O standards including LVDS and SSTL, the EP2C70F672C7N FPGA offers versatility in interfacing with different peripherals and devices. Packaged in a surface-mount-friendly PBGA or similar package marked with the "N" designation, it is designed for ease of installation and optimal performance in compact environments

Caratteristiche principali

High-density architecture with 4,608 to 68,416 LEs

M4K embedded memory blocks

Up to 1.1 Mbits of RAM available without reducing available logic

4,096 memory bits per block (4,608 bits per block including 512 parity bits)

Variable port configurations of 1, 2, 4, 8, 9, 16, 18, 32, and 36

True dual-port (one read and one write, two reads, or two writes) operation for 1, 2, 4, 8, 9, 16, and 18 modes

Byte enables for data input masking during writes

Up to 260-MHz operation

Embedded multipliers

Up to 150 18-18-bit multipliers are each configurable as two independent 9-9-bit multipliers with up to 250-MHz performance

Optional input and output registers

Advanced I/O support

High-speed differential I/O standard support, including LVDS, RSDS, mini-LVDS, LVPECL, differential HSTL, and differential SSTL

Single-ended I/O standard support, including 2.5-V and 1.8-V, SSTL class I and II, 1.8-V and 1.5-V HSTL class I and II, 3.3-V PCI and PCI-X 1.0, 3.3-, 2.5-, 1.8-, and 1.5-V LVCMOS, and 3.3-, 2.5-, and 1.8-V LVTTL

Peripheral Component Interconnect Special Interest Group (PCI SIG) PCI Local Bus Specification, Revision 3.0 compliance for 3.3-V operation at 33 or 66 MHz for 32- or 64-bit interfaces

PCI Express with an external TI PHY and an Altera PCI Express 1 Megacore function

133-MHz PCI-X 1.0 specification compatibility

High-speed external memory support, including DDR, DDR2, and SDR SDRAM, and QDRII SRAM supported by drop in Altera IP MegaCore functions for ease of use

Three dedicated registers per I/O element (IOE): one input register, one output register, and one output-enable register

Programmable bus-hold feature

Programmable output drive strength feature

Programmable delays from the pin to the IOE or logic array

I/O bank grouping for unique VCCIO and/or VREF bank settings

MultiVolt I/O standard support for 1.5-, 1.8-, 2.5-, and 3.3-interfaces

Hot-socketing operation support

Tri-state with weak pull-up on I/O pins before and during configuration

Programmable open-drain outputs

Series on-chip termination support

(Continue .)

Specifiche

Programmabe	Not Verified	Number of LABs/CLBs	4276
Number of Logic Elements/Cells	68416	Total RAM Bits	1152000
Number of I/O	422	Number of Gates	-
Voltage - Supply	1.15V ~ 1.25V	Mounting Type	Surface Mount
Operating Temperature	0°C ~ 85°C (TJ)

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..