Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

DS96F173ME/883 +BOM

EIA-485/EIA-422 Quad Differential Receivers

Produttore:

Texas Instruments, Inc
ProduttorePart #:

DS96F173ME/883
Scheda dati:

DS96F173ME/883 Scheda dati (PDF)
Type:

Receiver
Protocol:

RS422, RS423, RS485
Number Of Drivers/Receivers:

0/4
Receiver Hysteresis:

50 mV
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per DS96F173ME/883

DS96F173ME/883 Descrizione generale

The DS96F173 and the DS96F175 are high speed quad differential line receivers designed to meet the EIA-485 standard. The DS96F173 and the DS96F175 offer improved performance due to the use of L-FAST bipolar technology. The use of LFAST technology allows the DS96F173 and DS96F175 to operate at higher speeds while minimizing power consumption.

The DS96F173 and the DS96F175 have TRI-STATE outputs and are optimized for balanced multipoint data bus transmission at rates up to 15 Mbps. The receivers feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity of 200 mV over a common mode input voltage range of −7V to +12V. The receivers are therefore suitable for multipoint applications in noisy environments. The DS96F173 features an active high and active low Enable, common to all four receivers. The DS96F175 features separate active high Enables for each receiver pair.

Caratteristiche principali

Meets EIA-485, EIA-422A, EIA-423A Standards
Designed for Multipoint Bus Applications
TRI-STATE Outputs
Common Mode Input Voltage Range: −7V to +12V
Operates from Single +5.0V Supply
Lower Power Version
Input Sensitivity of ±200 mV Over Common Mode Range
Input Hysteresis of 50 mV Typical
High Input Impedance
DS96F173 and DS96F175 are Lead and Function Compatible with SN75173/175 or the AM26LS32/MC3486

All trademarks are the property of their respective owners.

Specifiche

Category	Integrated Circuits (ICs)InterfaceDrivers, Receivers, Transceivers	Series	-
Type	Receiver	Protocol	RS422, RS423, RS485
Number of Drivers/Receivers	0/4	Duplex	-
Receiver Hysteresis	50 mV	Data Rate	15Mbps
Voltage - Supply	4.5V ~ 5.5V	Operating Temperature	-55°C ~ 125°C (TA)
Mounting Type	Surface Mount	Number of receivers	1
Number of transmitters	1	Supply voltage (nom) (V)	5
Signaling rate (max) (MBits)	15	Fault protection (V)	-25 to 25
Common-mode range (V)	-7 to 12	Number of nodes	32
Isolated	No	Supply current (max) (µA)	55000
Rating	Military	Operating temperature range (°C)	-55 to 125
feature-function	Line Receiver	feature-data-rate	15Mbps
feature-transmitter-communication-type		feature-receiver-communication-type	RS-422\|RS-423\|RS-485
feature-number-of-transceivers		feature-number-of-transmitters
feature-number-of-receivers	4	feature-transmitter-signal-type
feature-receiver-signal-type	Single-Ended\|Differential	feature-number-of-drivers-per-line
feature-number-of-receivers-per-line	10@RS-422\|10@RS-423\|32@RS-485	feature-driving-mode	3-State
feature-power-supply-type	Single	feature-minimum-single-supply-voltage-v	4.5
feature-maximum-single-supply-voltage-v	5.5	feature-minimum-dual-supply-voltage-v
feature-maximum-dual-supply-voltage-v		feature-maximum-supply-current-ma	50
feature-packaging	Tube	feature-rad-hard	No
feature-pin-count	20	feature-cecc-qualified	No
feature-esd-protection		feature-escc-qualified
feature-military	Yes	feature-aec-qualified	No
feature-aec-qualified-number		feature-auto-motive	No
feature-p-pap	No	feature-eccn-code	EAR99
feature-svhc	No	feature-svhc-exceeds-threshold	No

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..