Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

DS90UB940-Q1 +BOM

1080p Dual FPD-Link III to CSI-2 Deserializer

Produttore:

TI
ProduttorePart #:

DS90UB940-Q1
Scheda dati:

DS90UB940-Q1 Scheda dati (PDF)
Pacchetto/custodia:

QFN
Tipologia di prodotto:

Line Driver or Receivers
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per DS90UB940-Q1

DS90UB940-Q1 Descrizione generale

The DS90UB940-Q1 is a FPD-Link III deserializer which, together with the DS90UH949/947/929-Q1 serializers, converts 1-lane or 2-lane FPD-Link III streams into a MIPI^® CSI-2 format. The deserializer can operate over cost-effective 50-Ω single-ended coaxial or 100-Ω differential shielded twisted-pair (STP) cables. It recovers the data from one or two FPD-Link III serial streams and translates it into a camera serial interface (CSI-2) format that can support video resolutions up to WUXGA and 1080p60 with 24-bit color depth.

The FPD-Link III interface supports video and audio data transmission and full duplex control, including I2C and SPI communication, over the same differential link. Consolidation of video data and control over two differential pairs decreases the interconnect size and weight and simplifies system design. EMI is minimized by the use of low voltage differential signaling, data scrambling, and randomization. In backward compatible mode, the device supports up to WXGA and 720p resolutions with 24-bit color depth over a single differential link.

The device automatically senses the FPD-Link III channels and supplies a clock alignment and de-skew functionality without the need for any special training patterns. This ensures skew phase tolerance from mismatches in interconnect wires such as PCB trace routing, cable pair-to-pair length differences, and connector imbalances.

Caratteristiche principali

AEC-Q100 qualified with the following results:
- Device temperature grade 2: –40°C to +105°C ambient operating temperature
Supports pixel clock frequency up to 170 MHz for WUXGA (1920×1200) and 1080p60 resolutions With 24-Bit color depth
1-Lane or 2-Lane FPD-link III interface with deskew capability
MIPI^® D-PHY / CSI-2 transmitter
- CSI-2 output ports with selectable 2- or 4- lane operation, up to 1.3 Gbps each lane
- Video formats: RGB888/666/565, YUV422/420, RAW8/10/12
- Programmable virtual channel identifier
Four high-speed GPIOs (up to 2 Mbps each)
Adaptive receive equalization
- Compensates for channel insertion loss of up to –15.3 dB at 1.7 GHz
- Provides automatic temperature and cable aging compensation
SPI control interfaces up to 3.3 Mbps
I2C (Master/Slave) With 1-Mbps fast-mode plus
Supports 7.1 multiple I2S (4 data) channels

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..