Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

DS80C410 +BOM

NetworkMicrocontrollerswithEthernetandCAN

Produttore:

DALLAS
ProduttorePart #:

DS80C410
Scheda dati:

DS80C410 Scheda dati (PDF)
Pacchetto/custodia:

LQFP100
RoHS:
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per DS80C410

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

DS80C410 Descrizione generale

GENERAL DESCRIPTIONThe DS80C410/DS80C411 network microcontrollers offer the highest integration available in an 8051 device. Peripherals include a 10/100 Ethernet MAC, three serial ports, an optional CAN 2.0B controller, 1-Wire® Master, and 64 I/O pins. The DS80C410 and DS80C411 also include 64kBytes internal SRAM for user application storage and network stack.FEATURES■ High-Performance Architecture Single 8051 Instruction Cycle in 54ns DC to 75MHz Clock Rate Flat 16MB Address Space Four Data Pointers with Auto-Increment/ Decrement and Select-Accelerate Data Movement 16/32-Bit Math Accelerator■ Multitiered Networking and I/O 10/100 Ethernet Media Access Controller (MAC) Optional CAN 2.0B Controller 1-Wire Net Controller Three Full-Duplex Hardware Serial Ports Up to Eight Bidirectional 8-Bit Ports (64 Digital I/O Pins)■ Robust ROM Firmware Supports Network Boot Over Ethernet Using DHCP and TFTP Full, Application-Accessible TCP/IP Network Stack Supports IPv4 and IPv6 Implements UDP, TCP, DHCP, ICMP, and IGMP Preemptive, Priority-Based Task Scheduler MAC Address can Optionally be Acquired from IEEE Registered DS2502-E48■ 10/100 Ethernet Mac Flexible IEEE 802.3 MII (10/100Mbps) and ENDEC (10Mbps) Interfaces Allow Selection of PHY Low-Power Operation Ultra-Low-Power Sleep Mode with Magic Packet® and Wake-Up Frame Detection 8kB On-Chip Tx/Rx Packet Data Memory with Buffer Control Unit Reduces Load on CPU Half- or Full-Duplex Operation with Flow Control Multicast/Broadcast Address Filtering with VLAN SupportAPPLICATIONS Industrial Control/Automation Environmental Monitoring Network Sensors Vending Home/Office Automation Transaction/Payment Terminals Data Converters (Serial-to-Ethernet, CAN-toEthernet) Remote Data-Collection Equipment

Caratteristiche principali

High-Performance Architecture
Single 8051 Instruction Cycle in 54ns
DC to 75MHz Clock Rate
Flat 16MB Address Space
Four Data Pointers with Auto-Increment/
Decrement and Select-Accelerate Data Movement
16/32-Bit Math Accelerator
Multitiered Networking and I/O
10/100 Ethernet Media Access Controller (MAC)
Optional CAN 2.0B Controller
1-Wire Net Controller
Three Full-Duplex Hardware Serial Ports
Up to Eight Bidirectional 8-Bit Ports (64 Digital I/O Pins)
Robust ROM Firmware
Supports Network Boot Over Ethernet Using DHCP and TFTP
Full, Application-Accessible TCP/IP Network Stack
Supports IPv4 and IPv6
Implements UDP, TCP, DHCP, ICMP, and IGMP
Preemptive, Priority-Based Task Scheduler
MAC Address can Optionally be Acquired from IEEE Registered DS2502-E48
10/100 Ethernet Mac
Flexible IEEE 802.3 MII (10/100Mbps) and ENDEC
(10Mbps) Interfaces Allow Selection of PHY
Low-Power Operation
Ultra-Low-Power Sleep Mode with Magic Packet®
and Wake-Up Frame Detection
8kB On-Chip Tx/Rx Packet Data Memory with Buffer
Control Unit Reduces Load on CPU
Half- or Full-Duplex Operation with Flow Control
Multicast/Broadcast Address Filtering with VLAN Support

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..