Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

CD4020BE +BOM

With its ripple-carry design, this integrated circuit is ideal for use in electronic devices that require precise counting capabilities

Produttore:

Texas Instruments
ProduttorePart #:

CD4020BE
Scheda dati:

CD4020BE Scheda dati (PDF)
Function:

Counter
Bits (#):

14
Technology Family:

CD4000
Supply Voltage (min) (V):

3
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per CD4020BE

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

CD4020BE Descrizione generale

The CD4020BE, along with its counterparts CD4024B and CD4040B, belongs to a series of ripple-carry binary counters. Each counter stage features master-slave flip-flops and advances one count on the negative transition of an input pulse. The counter can be reset to its all zeros state with a high level on the RESET line. Notably, the input-pulse line incorporates Schmitt trigger action, allowing for unlimited rise and fall times. All inputs and outputs are buffered to ensure optimal performance. The CD4020BE and its counterparts are available in various package options, including hermetic dual-in-line ceramic, dual-in-line plastic, small-outline, and thin shrink small-outline packages, offering versatility and reliability for diverse electronic applications

Caratteristiche principali

No latchup
Low-power consumption
Fully static operation
Schmitt Trigger input action
Maximum input current of 1 µA at 18 V and 25°C
High-temperature stability
Noise margin (over full package-temperature range): 2 V at V_DD = 5 V, 4 V at V_DD = 10 V, 6 V at V_DD = 15 V
Meets all requirements of JEDEC Tentative Standard No. 13B, "Standard Specifications for Description of 'B' Series CMOS Devices"
Applications:

Data conversion circuits
Frequency dividers and counters
Time-delay circuits
Logic functions
Counters and timers

Applicazione

Useful for time delays

Specifiche

Function	Counter	Bits (#)	14
Technology family	CD4000	Supply voltage (min) (V)	3
Supply voltage (max) (V)	18	Input type	Standard CMOS
Output type	Push-Pull	Features	Balanced outputs, Positive input clamp diode, Standard speed (tpd > 50ns)
Operating temperature range (°C)	-55 to 125	Rating	Catalog

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..

Garanzia

Prodotto 365 giorni

Qualità garantita

Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.

Valutazioni e recensioni

Di più

C**n 04/10/2021

Great quality, fast shipping, child seller.

M**n 12/29/2020

For such a price an excellent set. There are all the main denominations.

B**O 10/09/2020

Very satisfied! Not yet tested but looking seems all OK

J**n 08/30/2020

I ordered the white display. The display works (now) fine: it shows a bright and well readable picture and operates even with a 2.8V power supply.However, I took me long to figure out how to operate it in I2C mode:the following modifications are necessary:- remove R4 and put the resistor into R3 position- put in 0 Ohm resistors (=bridges) on R5 and R7 positions- pin DC selects the I2C address: pulling it via 10k resistor to Vcc gives address "3D", pulling it to GND gives address "3C"- you MUST connect the RES pin such, that there is a reset after power-on (via arduino res-pin or by connecting to RC circuit: 4.7µF to GND and 10k to Vcc). If you don't do, the display stays dead.=> all this info is received on the sellers page! Only resistors R13, R15 and r17 are mentioned, but they don't exist on the module.Seller should add documentation and maybe offer this (otherwise very good) display in 2 dedicated configurations for either (i) SPI or (ii) I2C operation.