Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

CC2650MODAMOHR +BOM

SimpleLink™ 32-bit Arm Cortex-M3 multiprotocol 2.4 GHz wireless module with 128kB Flash

Produttore:

Texas Instruments, Inc
ProduttorePart #:

CC2650MODAMOHR
Scheda dati:

CC2650MODAMOHR Scheda dati (PDF)
Series:

SimpleLink™
Programmable:

Not Verified
RF Family/Standard:

802.15.4, Bluetooth
Protocol:

Bluetooth v5.1, Zigbee®

CC2650MODAMOHR Descrizione generale

The SimpleLink™ CC2650MODA device is a wireless microcontroller (MCU) module that targets Bluetooth^® low energy applications. The CC2650MODA device can also run ZigBee^® and 6LoWPAN and ZigBee RF4CE™ remote control applications.

The module is based on the SimpleLink CC2650 wireless MCU, a member of the CC26xx family of cost-effective, ultra-low-power, 2.4-GHz RF devices. Very-low active RF and MCU current and low-power mode current consumption provide excellent battery lifetime and allow for operation on small coin-cell batteries and in energy-harvesting applications.

The CC2650MODA module contains a 32-bit ARM Cortex-M3 processor that runs at 48 MHz as the main processor and a rich peripheral feature set that includes a unique ultra-low-power sensor controller. This sensor controller is good for interfacing with external sensors or for collecting analog and digital data autonomously while the rest of the system is in sleep mode. Thus, the CC2650MODA device is good for applications within a wide range of products including industrial, consumer electronics, and medical devices.

The CC2650MODA module is pre-certified for operation under the regulations of the FCC, IC, ETSI, and ARIB. These certifications save significant cost and effort for customers when integrating the module into their products.

The Bluetooth low energy controller and the IEEE 802.15.4 MAC are embedded in the ROM and are partly running on a separate ARM^® Cortex^®-M0 processor. This architecture improves overall system performance and power consumption and makes more flash memory available.

The Bluetooth low energy software stack (BLE-Stack) and the ZigBee software stack (Z-Stack™) are available free of charge.

Caratteristiche principali

Microcontroller
- Powerful ARM^® Cortex^®-M3
- EEMBC CoreMark^® Score: 142
- Up to 48-MHz Clock Speed
- 128KB of In-System Programmable Flash
- 8KB of SRAM for Cache
- 20KB of Ultra-Low-Leakage SRAM
- 2-Pin cJTAG and JTAG Debugging
- Supports Over-The-Air (OTA) Upgrade
Ultra-Low-Power Sensor Controller
- Can Run Autonomous From the Rest of the System
- 16-Bit Architecture
- 2KB of Ultra-Low-Leakage SRAM for
  Code and Data
Efficient Code Size Architecture, Placing Drivers, Bluetooth^® low energy Controller, IEEE^® 802.15.4 Medium Access Control (MAC), and Bootloader in ROM
Integrated Antenna
Peripherals
- All Digital Peripheral Pins Can Be Routed to Any GPIO
- Four General-Purpose Timer Modules
  (8 × 16-Bit or 4 × 32-Bit Timer, PWM Each)
- 12-Bit ADC, 200-ksamples/s, 8-Channel
  Analog MUX
- Continuous Time Comparator
- Ultra-Low-Power Analog Comparator
- Programmable Current Source
- UART
- 2 × SSI (SPI, MICROWIRE, TI)
- I²C
- I2S
- Real-Time Clock (RTC)
- AES-128 Security Module
- True Random Number Generator (TRNG)
- 15 GPIOs
- Support for Eight Capacitive Sensing Buttons
- Integrated Temperature Sensor
External System
- On-Chip Internal DC-DC Converter
- No External Components Needed, Only Supply Voltage
Low Power
- Wide Supply Voltage Range
  - Operation from 1.8 to 3.8 V
- Active-Mode RX: 6.2 mA
- Active-Mode TX at 0 dBm: 6.8 mA
- Active-Mode TX at +5 dBm: 9.4 mA
- Active-Mode MCU: 61 µA/MHz
- Active-Mode MCU: 48.5 CoreMark/mA
- Active-Mode Sensor Controller:
  0.4 mA + 8.2 µA/MHz
- Standby: 1 µA (RTC Running and RAM/CPU Retention)
- Shutdown: 100 nA (Wake Up on External Events)
RF Section
- 2.4-GHz RF Transceiver Compatible With Bluetooth low energy (BLE) 5.1 Specification and IEEE 802.15.4 PHY and MAC
- CC2650MODA RF-PHY Qualified (QDID: 88415)
- Excellent Receiver Sensitivity (–97 dBm for Bluetooth low energy and –100 dBm for 802.15.4), Selectivity, and Blocking Performance
- Programmable Output Power up to +5 dBm
- Pre-certified for Compliance With Worldwide Radio Frequency Regulations
  - ETSI RED (Europe)
  - IC (Canada)
  - FCC (USA)
  - ARIB STD-T66 (Japan)
  - JATE (Japan)
Tools and Development Environment
- Full-Feature and Low-Cost Development Kits
- Multiple Reference Designs for Different RF Configurations
- Packet Sniffer PC Software
- Sensor Controller Studio
- SmartRF™ Studio
- SmartRF Flash Programmer 2
- IAR Embedded Workbench^® for ARM
- Code Composer Studio™

Specifiche

Category	RF and WirelessRF Transceiver Modules and Modems	Series	SimpleLink™
Programmable	Not Verified	RF Family/Standard	802.15.4, Bluetooth
Protocol	Bluetooth v5.1, Zigbee®	Modulation	DSSS, O-QPSK, GFSK
Frequency	2.4GHz	Data Rate	1Mbps
Power - Output	5dBm	Sensitivity	-100dBm
Serial Interfaces	I²C, I²S, SPI, UART	Antenna Type	Integrated, Chip
Utilized IC / Part	CC2650	Memory Size	128kB Flash, 8kB SRAM
Voltage - Supply	1.8V ~ 3.8V	Current - Receiving	6.2mA
Current - Transmitting	6.8mA ~ 9.4mA	Mounting Type	Surface Mount
Operating Temperature	-40°C ~ 85°C	Base Product Number	CC2650
Protocols	Bluetooth low energy 4.2	Type	Wireless module
Features	LE 1M PHY	Peripherals	1 UART, 12-bit ADC 8-channel, 2 SPI, 4 timers, I2C, I2S
Rating	Catalog	Flash memory (kByte)	128
RAM (kByte)	20	Number of GPIOs	15
Security	128-bit AES	Sensitivity (best) (dBm)	-97
Operating temperature range (°C)	-40 to 85	feature-packaging	Tape and Reel
feature-pin-count	29	feature-cecc-qualified	No
feature-esd-protection		feature-military	No
feature-aec-qualified	No	feature-aec-qualified-number
feature-auto-motive	No	feature-p-pap	No
feature-eccn-code	3A991a.2.	feature-svhc
feature-svhc-exceeds-threshold	No

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..

Garanzia

Prodotto 365 giorni

Qualità garantita

Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.

Valutazioni e recensioni

Di più

B**Y 03/13/2024

nice to cooperate with you !Hope we can cooperate next time! yuki

L**e 10/25/2023

Very convenient modules. Ideal for atmega328p pro-mini, you just need to remove the jumper rts/cts next to the chip, and you can connect them to each other (i think it was conceived). Have 3.3 and 5 v (jumper only). There are no problems with drivers and perversions with bookmarks in drivers like ftdi and p2102. I recommend to buy immediately pieces 5 and make 3.3 v and 5 v version. At 3.3 v, the level on the feet of the chip corresponds, which is not always the case with other USB-UART.

M**t 02/28/2022

Chips are cut for sure. They look like not soldered. Most likely the seller of their harassed from the dead mainland. but!!!! All the chips are alive and have passed all the tests, hence the conclusion. Tova fit