Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

ATTINY26L-8SI +BOM

The ATTINY26L-8SI is a compact 8-bit microcontroller with advanced features such as 2K of flash memory

Produttore:

Microchip
ProduttorePart #:

ATTINY26L-8SI
Scheda dati:

ATTINY26L-8SI Scheda dati (PDF)
Series:

ATtiny26
Mounting Style:

SMD/SMT
Core:

AVR
Program Memory Size:

2 kB
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per ATTINY26L-8SI

ATTINY26L-8SI Descrizione generale

Whether used in industrial control systems, consumer electronics, or automotive applications, the ATTINY26L-8SI offers the flexibility and efficiency required for modern embedded designs. Its blend of low power operation, rich feature set, and compact size make it a compelling solution for engineers seeking to optimize performance and energy efficiency in their designs

Caratteristiche principali

High Performance, Low Power AVR® 8-Bit Microcontroller
Advanced RISC Architecture
– 123 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
Non-volatile Program and Data Memories
– 2/4/8K Byte of In-System Programmable Program Memory Flash (ATtiny261/461/861) Endurance: 10,000 Write/Erase Cycles
– 128/256/512 Bytes In-System Programmable EEPROM (ATtiny261/461/861) Endurance: 100,000 Write/Erase Cycles
– 128/256/512 Bytes Internal SRAM (ATtiny261/461/861)
– Programming Lock for Self-Programming Flash Program and EEPROM Data Security
Peripheral Features
– 8/16-bit Timer/Counter with Prescaler and Two PWM Channels
– 8/10-bit High Speed Timer/Counter with Separate Prescaler
3 High Frequency PWM Outputs with Separate Output Compare Registers Programmable Dead Time Generator
– Universal Serial Interface with Start Condition Detector
– 10-bit ADC
11 Single Ended Channels
16 Differential ADC Channel Pairs
15 Differential ADC Channel Pairs with Programmable Gain (1x, 8x, 20x, 32x)
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
Special Microcontroller Features
– debugWIRE On-chip Debug System
– In-System Programmable via SPI Port
– External and Internal Interrupt Sources
– Low Power Idle, ADC Noise Reduction, and Power-down Modes
– Enhanced Power-on Reset Circuit
– Programmable Brown-out Detection Circuit
– Internal Calibrated Oscillator
I/O and Packages
– 16 Programmable I/O Lines
– 20-pin PDIP, 20-pin SOIC and 32-pad MLF
Operating Voltage:
– 1.8 - 5.5V for ATtiny261V/461V/861V
– 2.7 - 5.5V for ATtiny261/461/861
Speed Grade:
– ATtiny261V/461V/861V: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 10 MHz @ 2.7 - 5.5V
– ATtiny261/461/861: 0 - 10 MHz @ 2.7 - 5.5V, 0 - 20 MHz @ 4.5 - 5.5V
Industrial Temperature Range
Low Power Consumption
– Active Mode: 1 MHz, 1.8V: 380μA
– Power-down Mode: 0.1μA at 1.8V

Specifiche

Product Category	8-bit Microcontrollers - MCU	Series	ATtiny26
Mounting Style	SMD/SMT	Core	AVR
Program Memory Size	2 kB	Data Bus Width	8 bit
ADC Resolution	10 bit	Maximum Clock Frequency	8 MHz
Number of I/Os	16 I/O	Data RAM Size	128 B
Supply Voltage - Min	2.7 V	Supply Voltage - Max	5.5 V
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 85 C
Data RAM Type	SRAM	Data ROM Size	128 B
Data ROM Type	EEPROM	Height	2.37 mm
Interface Type	ISP, SPI, UART, USI	Length	13 mm
Number of ADC Channels	11 Channel	Number of Timers/Counters	2 Timer
Processor Series	tinyAVR	Product	MCU
Product Type	8-bit Microcontrollers - MCU	Program Memory Type	Flash
Factory Pack Quantity	37	Subcategory	Microcontrollers - MCU
Tradename	AVR	Width	7.6 mm
Unit Weight	0.028254 oz

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..