Metodo di pagamento
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
Hall Effect Sensor ATS617LSGTN-T: A differential 25mA sensor module designed for various voltage inputs (5V
SIP4Produttore:
ProduttorePart #:
ATS617LSGTN-T
Scheda dati:
Type:
Gear Tooth Sensor
Operating Supply Current:
6 mA
Maximum Output Current:
25 mA
Operating Supply Voltage:
4.5 V to 24 V
EDA/CAD Modelli:
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
Featuring a 4-SIP package and a wide operating temperature range of -40°C to +150°C, the ATS617LSGTN-T is built to withstand harsh conditions without compromising performance. Its impressive bandwidth of 15kHz allows for fast and precise detection, making it ideal for high-speed gear tooth monitoring applications
Fully Optimized Differential Digital Gear-Tooth Sensor
Single-Chip Sensing IC for High Reliability
Extremely Low Timing Accuracy Drift with Temperature
Large Operating Air Gaps
Small Mechanical Size
Optimized Magnetic Circuit
Patented Peak-Detecting Filter:
<200 s Power-On Time
<10 RPM Operation (single-tooth target)
Correct First-Edge Detection
Uses Small Value Ceramic Capacitors
Under-Voltage Lockout
Wide Operating Voltage Range
Defined Power-Up State
DYNAMIC, PEAK-DETECTING, DIFFERENTIAL HALL-EFFECT GEAR-TOOTH SENSORS
The ATS610LSA and ATS611LSB gear-tooth sensors are optimized Hall IC plus magnet modules that provide a user-friendly solution for digital gear-tooth sensing applications. Each module combines in a compact high-temperature plastic package, a samarium-cobalt magnet, a pole piece, and a differential Hall-effect IC that has been optimized to the magnetic circuit. These sensors can be easily used in conjunction with a wide variety of gear or target shapes and sizes.
Product Category | Board Mount Hall Effect / Magnetic Sensors | Type | Gear Tooth Sensor |
Operating Supply Current | 6 mA | Maximum Output Current | 25 mA |
Operating Supply Voltage | 4.5 V to 24 V | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 150 C | Mounting Style | Through Hole |
Series | ATS617 | Moisture Sensitive | Yes |
Output Voltage | 100 mV | Product | Hall Effect Latches / Switches |
Product Type | Hall Effect / Magnetic Sensors | Factory Pack Quantity | 800 |
Subcategory | Sensors | Supply Voltage - Max | 24 V |
Supply Voltage - Min | 4.5 V | Termination Style | Solder Pad |
Relativi al servizio post-vendita e alla liquidazione
Metodo di pagamento
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | $3,706 | $3,71 |
10+ | $3,247 | $32,47 |
30+ | $2,972 | $89,16 |
100+ | $2,696 | $269,60 |
500+ | $2,568 | $1.284,00 |
800+ | $2,511 | $2.008,80 |
I prezzi sottostanti sono solo di riferimento.
Tutte le distinte materiali (BOM) possono essere inviate via e-mail a
[email protected],
oppure compila il modulo sottostante per richiedere un preventivo per ATS617LSGTN-T, preventivi garantiti entro
12 ore.
A1304ELHLX-T
Allegro Microsystems
1000+ $0,676
A3213ELHLT-T
Allegro MicroSystems
1000+ $0,312
A3212ELHLT-T
Allegro Microsystems
Packaged in a 3-Pin SOT-23W format, suitable for tape and reel packaging
A1326LUA-T
Allegro MicroSystems
Low Noise, Linear Hall Effect Sensor ICs with Analog Output, SIP-3, RoHS
A1220LUA-T
Allegro MicroSystems
Magnetic Sensor with Chopper Stabilization