Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro politica sulla riservatezza.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

AT90S4433 +BOM

AT90S4433 - Product Description - Microchip Technology

Produttore:

Microchip
ProduttorePart #:

AT90S4433
Scheda dati:

AT90S4433 Scheda dati (PDF)
Pacchetto/custodia:

QFP-32
Tipologia di prodotto:

LED Drivers
RoHS:
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per AT90S4433

AT90S4433 Descrizione generale

DescriptionThe AT90S2333/4433 is a low-power CMOS 8-bit microcontroller based on the AVR RISC architecture. By executing powerful instructions in a single clock cycle, the AT90S2333/4433 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.Features• High-performance and Low-power AVR® 8-bit RISC Architecture – 118 Powerful Instructions - Most Single Cycle Execution – 32 x 8 General Purpose Working Registers – Up to 8 MIPS Throughput at 8 MHz• Data and Nonvolatile Program Memory – 2K/4K Bytes of In-System Programmable Flash Endurance 1,000 Write/Erase Cycles – 128 Bytes of SRAM – 128/256 Bytes of In-System Programmable EEPROM Endurance: 100,000 Write/Erase Cycles – Programming Lock for Flash Program and EEPROM Data Security• Peripheral Features – One 8-bit Timer/Counter with Separate Prescaler – Expanded 16-bit Timer/Counter with Separate Prescaler, Compare, Capture Modes and 8-, 9- or 10-bit PWM – On-chip Analog Comparator – Programmable Watchdog Timer with Separate On-chip Oscillator – Programmable UART – 6-channel, 10-bit ADC – Master/Slave SPI Serial Interface• Special Microcontroller Features – Brown-Out Reset Circuit – Enhanced Power-on Reset Circuit – Low-Power Idle and Power Down Modes – External and Internal Interrupt Sources• Specifications – Low-power, High-speed CMOS Process Technology – Fully Static Operation• Power Consumption at 4 MHz, 3V, 25°C – Active: 3.4 mA – Idle Mode: 1.4 mA – Power Down Mode: <1 µA• I/O and Packages – 20 Programmable I/O Lines – 28-pin PDIP and 32-pin TQFP• Operating Voltage – 2.7V - 6.0V (AT90LS2333 and AT90LS4433) – 4.0V - 6.0V (AT90S2333 and AT90S4433)• Speed Grades – 0 - 4 MHz (AT90LS2333 and AT90LS4433) – 0 - 8 MHz (AT90S2333 and AT90S4433)

Caratteristiche principali

High-performance and Low-power AVR® 8-bit RISC Architecture
– 118 Powerful Instructions - Most Single Cycle Execution
– 32 x 8 General Purpose Working Registers
– Up to 8 MIPS Throughput at 8 MHz
Data and Nonvolatile Program Memory
– 2K/4K Bytes of In-System Programmable Flash Endurance 1,000 Write/Erase Cycles
– 128 Bytes of SRAM
– 128/256 Bytes of In-System Programmable EEPROM Endurance: 100,000 Write/Erase Cycles
– Programming Lock for Flash Program and EEPROM Data Security
Peripheral Features
– One 8-bit Timer/Counter with Separate Prescaler
– Expanded 16-bit Timer/Counter with Separate Prescaler, Compare, Capture Modes and 8-, 9- or 10-bit PWM
– On-chip Analog Comparator
– Programmable Watchdog Timer with Separate On-chip Oscillator
– Programmable UART
– 6-channel, 10-bit ADC
– Master/Slave SPI Serial Interface
Special Microcontroller Features
– Brown-Out Reset Circuit
– Enhanced Power-on Reset Circuit
– Low-Power Idle and Power Down Modes
– External and Internal Interrupt Sources
Specifications
– Low-power, High-speed CMOS Process Technology
– Fully Static Operation
Power Consumption at 4 MHz, 3V, 25°C
– Active: 3.4 mA
– Idle Mode: 1.4 mA
– Power Down Mode: <1 µA
I/O and Packages
– 20 Programmable I/O Lines
– 28-pin PDIP and 32-pin TQFP
Operating Voltage
– 2.7V - 6.0V (AT90LS2333 and AT90LS4433)
– 4.0V - 6.0V (AT90S2333 and AT90S4433)
Speed Grades
– 0 - 4 MHz (AT90LS2333 and AT90LS4433)
– 0 - 8 MHz (AT90S2333 and AT90S4433)

Specifiche

Product Category

Microchip Technology

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..