Metodo di pagamento
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
Hall Effect Sensor with a minimum sensitivity of 0.5mT and a maximum of 5.5mT, suitable for detecting magnetic fields
SOT-23-3Produttore:
ProduttorePart #:
A1126LLHLT-T
Scheda dati:
Pbfree Code:
Yes
Part Life Cycle Code:
Active
Reach Compliance Code:
compliant
Body Breadth:
1.91 mm
EDA/CAD Modelli:
Invia tutte le distinte materiali a
[email protected],
oppure compila il modulo sottostante per un preventivo su A1126LLHLT-T. Risposta garantita entro
12hr.
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
The A1126LLHLT-T is a cutting-edge linear Hall-effect sensor that boasts high sensitivity and precise measurement capabilities. Operating on a supply voltage range of 2.5V to 3.3V, this sensor delivers a quiescent output voltage that is approximately half of the supply voltage, ensuring accurate readings. With its linear output voltage proportional to magnetic field strength, this sensor offers an impressive sensitivity of 0.8mV/G and a low temperature coefficient of 10ppm/°C. Its wide operating temperature range of -40°C to 85°C further enhances its versatility, making it suitable for use in a variety of environmental conditions
AEC-Q100 automotive qualified
Omnipolar operation
Low switchpoint drift
Superior temperature stability
Insensitive to physical stress
Reverse-battery protection
Robust EMC capability
Robust ESD protection
Pbfree Code | Yes | Part Life Cycle Code | Active |
Reach Compliance Code | compliant | Body Breadth | 1.91 mm |
Body Height | 1 mm | Body Length or Diameter | 2.98 mm |
Hysteresis | 3 mT | Input Mode | UNIPOLAR |
JESD-609 Code | e3 | Magnetic Field Range-Max | 5.5 mT |
Magnetic Field Range-Min | 0.5 mT | Mounting Feature | SURFACE MOUNT |
Number of Terminals | 3 | Operating Current-Max | 4 mA |
Operating Temperature-Max | 150 °C | Operating Temperature-Min | -40 °C |
Output | OPEN-DRAIN | Output Current-Max | 60 mA |
Output Polarity | INVERTING | Output Range | 30-60mA |
Output Type | DIGITAL CURRENT | Sensors/Transducers Type | MAGNETIC FIELD SENSOR,HALL EFFECT |
Supply Voltage-Max | 24 V | Supply Voltage-Min | 3 V |
Surface Mount | YES | Technology | BICMOS |
Terminal Finish | MATTE TIN | Termination Type | SOLDER |
Relativi al servizio post-vendita e alla liquidazione
Metodo di pagamento
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.
A1304ELHLX-T
Allegro Microsystems
1000+ $0,676
A3213ELHLT-T
Allegro MicroSystems
1000+ $0,312
A3212ELHLT-T
Allegro Microsystems
Packaged in a 3-Pin SOT-23W format, suitable for tape and reel packaging
A1326LUA-T
Allegro MicroSystems
Low Noise, Linear Hall Effect Sensor ICs with Analog Output, SIP-3, RoHS
A1220LUA-T
Allegro MicroSystems
Magnetic Sensor with Chopper Stabilization