Metodo di pagamento
3B32-00 +BOM
Sensor and Detector Interface 16.5V 10mA 30-Pin Tray
--
Produttore:
-
ProduttorePart #:
3B32-00
-
Scheda dati:
-
Product:
Isolated Signal Conditioners
-
Series:
3B32
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for 3B32-00, guaranteed quotes back within 12hr.
Disponibilità: 4939 PZ
Compila il breve modulo sottostante e ti forniremo immediatamente il preventivo.
3B32-00 Descrizione generale
The 3B Series Signal Conditioning I/O Subsystem provides a low cost, versatile method of interconnecting real world analog signals to a data acquisition, monitoring or control system. It is designed to interface directly to analog signals such as thermocouple, RTD, ac and dc Strain Gage, Torque Transducer, Frequency, LVDT, AD590/AC2626 solid state temperature sensor outputs, and millivolt or process current signals, and convert the inputs to standardized analog outputs compatible with high level analog I/O subsystems.
The 3B Series Subsystem consists of a 19" relay rack, compatible universal mounting backplane and a family of plug-in input and output signal conditioning modules (up to 16 per rack). 8- and 4-channel backplanes are also available. Each backplane incorporates screw terminals for sensor inputs and current outputs and a connector for high level, single-ended outputs to the user’s equipment.
Input and output modules are offered in both isolated (±1500 V peak) and nonisolated versions. The input modules feature complete signal conditioning circuitry optimized for specific sensors or analog signals, and provide high level analog outputs. Each input module provides two simultaneous outputs: 0 V to +10 V (or ±10 V) and 4–20 mA (or 0–20 mA). Output modules accept 0 V to +10 V (or ±10 V) single ended signals and provide an isolated or nonisolated 4–20 mA (or 0–20 mA) process signal. All modules feature a universal pinout and may be readily “mixed and matched” and interchanged without disrupting field wiring.
Each backplane contains the provision for a subsystem power supply. The 3B Series Subsystem can operate either from a common dc/dc or ac power supply mounted on each backplane, or from externally provided dc power. Two LEDs are used to indicate that power is being applied.
Caratteristiche principali
- Accepts Process Crrent Input (0-20mA or 4-20mA)
- 100 Ohm Current Sense Resistor Supplied
- 3 Hz BW
- Voltage (± 10V) and Current Outputs (0-20mA or 4-20mA)
Specifiche
Product Category: | Other Modules | Product: | Isolated Signal Conditioners |
Product Type: | Other Modules | Series: | 3B32 |
Subcategory: | Embedded Solutions |
Politiche di servizio e altro
Relativi al servizio post-vendita e alla liquidazione
Per canali di pagamento alternativi, contattaci a:
[email protected]metodo di spedizione
AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..
Prodotto 365 giorni
Qualità garantita
Promettiamo di fornire un servizio di garanzia della qualità di 365 giorni per tutti i nostri prodotti.
In Stock: 4.939
Minimum Order: 1
Qtà. | Prezzo unitario | Est. Prezzo |
---|---|---|
1+ | - | - |
I prezzi sottostanti sono solo di riferimento.
prodotti sponsorizzati
Top Sellers
-
5B32-01
Analog Devices, Inc
4/20mA Other Modules ISO mA INPUT
-
1B41AN
Analog Devices, Inc
IC RTD SIGNAL COND HYBRID 38-DIP
-
5B41-02
Analog Devices, Inc
Sensor and Detector Interface 5.25V 30mA 14-Pin Tray
-
1B41BN
Analog Devices, Inc
Sensor and Detector Interface 18V 15-Pin Tube
-
5B39-01
Analog Devices, Inc
Sensor and Detector Interface 5.25V 170mA 14-Pin Tray