Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro Privacy Policy.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

XRT83SL30IV-F +BOM

Line Interface Unit 2.048Mbps E1/J1/T1 Short Serial 64-Pin TQFP

Produttore:

MAXLINEAR INC
ProduttorePart #:

XRT83SL30IV-F
Scheda dati:

XRT83SL30IV-F Scheda dati (PDF)
Part Life Cycle Code:

Obsolete
Reach Compliance Code:

compliant
HTS Code:

8542.39.00.01
JESD-30 Code:

S-PQFP-G64
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per XRT83SL30IV-F

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

Caratteristiche principali

Fully integrated single-channel short-haul transceiver for E1,T1 or J1 applications
Programmable Transmit Pulse Shaper for E1,T1 or J1 short-haul interfaces
Five fixed transmit pulse settings for T1 short-haul applications plus a fully programmable waveform generator for transmit output pulse shaping
High receiver interference immunity
Receive monitor mode handles 0 to 29dB resistive attenuation along with 0 to 6dB of cable attenuation for both T1 and E1 modes
Supports 75Ω and 120Ω (E1), 100Ω (T1) and 110Ω (J1) applications.
Internal and/or external impedance matching for 75Ω,100Ω, 110Ω and 120Ω.
Tri-State transmit output and receive input capability for redundancy applications
Provides High Impedance for Tx and Rx during power off
Transmit return loss meets or exceeds ETSI 300 166 standard
On-chip digital clock recovery circuit for high input jitter tolerance
Crystal-less digital jitter attenuator with 32-bit or 64- bit FIFO Selectable either in transmit or receive path
On-chip frequency multiplier generates T1 or E1 Master clocks from variety of external clock sources
On-chip transmit short-circuit protection and limiting, and driver fail monitor output (DMO)
Receive loss of signal (RLOS) output
On-chip HDB3/B8ZS/AMI encoder/decoder
QRSS pattern generation and detection for testing and monitoring
Error and Bipolar Violation Insertion and Detection
(Continue .)

Applicazione

T1 Digital Cross-Connects (DSX-1)
ISDN Primary Rate Interface
CSU/DSU E1/T1/J1 Interface
T1/E1/J1 LAN/WAN Routers
Public switching Systems and PBX Interfaces
T1/E1/J1 Multiplexer and Channel Banks

Specifiche

Part Life Cycle Code	Obsolete	Reach Compliance Code	compliant
HTS Code	8542.39.00.01	JESD-30 Code	S-PQFP-G64
JESD-609 Code	e3	Length	10 mm
Moisture Sensitivity Level	1	Number of Functions	1
Number of Terminals	64	Operating Temperature-Max	85 °C
Operating Temperature-Min	-40 °C	Qualification Status	Not Qualified
Seated Height-Max	1.6 mm	Supply Voltage-Nom	3.3 V
Surface Mount	YES	Telecom IC Type	PCM TRANSCEIVER
Temperature Grade	INDUSTRIAL	Terminal Finish	MATTE TIN
Terminal Form	GULL WING	Terminal Pitch	0.5 mm
Terminal Position	QUAD	Width	10 mm

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..