Questo sito web utilizza i cookie. Utilizzando questo sito, acconsenti all'utilizzo dei cookie. Per ulteriori informazioni, dai un'occhiata al nostro Privacy Policy.

Le immagini servono solo come riferimento,

Vedi Specifiche Tecniche

S-8241ABKMC-GBKT2G +BOM

Battery Management 4.325V Single Cell

Produttore:

ABLIC Inc.
ProduttorePart #:

S-8241ABKMC-GBKT2G
Scheda dati:

S-8241ABKMC-GBKT2G Scheda dati (PDF)
Function:

Battery Protection
Battery Chemistry:

Lithium Ion/Polymer
Number of Cells:

1
Fault Protection:

Over Current, Over Voltage
EDA/CAD Modelli:

Richiedi modelli CAD gratuiti per S-8241ABKMC-GBKT2G

E-mail: [email protected]

Skype: live:.cid.ab6b29428937b76

tel: +852 95804164

S-8241ABKMC-GBKT2G Descrizione generale

Battery Battery Protection IC Lithium Ion/Polymer SOT-23-5

Caratteristiche principali

(1) Internal high-accuracy voltage detection circuit
Overcharge detection voltage: 3.9 to 4.4 V (5 mV-step)
Accuracy of ±25 mV(+25 °C) and ± 30 mV(−5 to +55 °C)
Overcharge release voltage: 3.8 to 4.4 V1 Accuracy of ±50 mV
Overdischarge detection voltage: 2.0 to 3.0 V (100 mV-step) Accuracy of ±80 mV
Overdischarge release voltage: 2.0 to 3.4 V2 Accuracy of ±100 mV
Overcurrent 1 detection voltage: 0.05 to 0.3 V (5 mV-step) Accuracy of ±20 mV
Overcurrent 2 detection voltage: 0.5 V (fixed) Accuracy of ±100 mV
(2) A high voltage withstand device isused for charger connection pins
(VM and CO pins: Absolute maximum rating = 26 V)
(3) Delay times (overcharge: tCU; overdischarge: tDL; overcurrent 1: tlOV1 ; overcurrent 2: tlOV2) are generated by an internal circuit. (External capacitors are unnecessary.) Accuracy of ±30%
(4) Internal three-step overcurrent detection circuit (overcurrent 1, overcurrent 2, and load short-circuiting)
(5) Either the 0 V battery charging function or 0 V battery charge inhibiting function can be selected.
(6) Products with and without a power-down function can be selected.
(7) Charger detection function and abnormal charge current detection function
The overdischarge hysterisis is released by detecting a negative VM pin voltage (typ. −1.3 V) (Charger detection function).
If the output voltage at DO pin is high and the VM pin voltage becomes equalto or lower than the charger detection voltage (typ. −1.3 V), the output voltage at CO pin goes low (Abnormal charge current detection function).
(8) Low current consumption
Operation: 3.0 μA typ. 5.0 μA max.
Power-down mode: 0.1 μA max.
(9) Wide operating temperature range: −40 to +85 °C
(10) Small package SOT-23-5, SNT-6A
(11) Lead-free products
1.Overcharge release voltage = Overcharge detection voltage - Overcharge hysteresis
The overcharge hysteresis can be selected in the range 0.0, or 0.1 to 0.4 V in 50 mV steps. (However, selection
“Overcharge release voltage<3.8 V” is enabled.)
2.Overdischarge release voltage = Overdischarge detection voltage + Overdischarge hysteresis
The overdischarge hysteresis can be selected in the range 0.0 to 0.7 V in100 mV steps. (However, selection
“Overdischarge release voltage>3.4 V” is enabled.)

Specifiche

Function	Battery Protection	Battery Chemistry	Lithium Ion/Polymer
Number of Cells	1	Fault Protection	Over Current, Over Voltage
Operating Temperature	-40°C ~ 85°C (TA)	Mounting Type	Surface Mount
Base Product Number	S-8241

Politiche di servizio e altro

Relativi al servizio post-vendita e alla liquidazione

Pagamento

Metodo di pagamento

TT/bonifico bancario

PayPal

Western Union

Grammo dei soldi

Per canali di pagamento alternativi, contattaci a:

[email protected]

Spedizione e imballaggio

metodo di spedizione

Fedex

UPS

DHL

NTN

Imballaggio

AVAQ determina e confeziona tutti i dispositivi in base ai requisiti di protezione contro le scariche elettrostatiche (ESD) e il livello di sensibilità all'umidità (MSL)..